Model
Bulk Filters SPF-1005945
Detail
This is a replacement ultra fine filter to be used in Respironics REMstar Legacy machines. The list of compatible machines include:REMstar Lite CPAPREMStar BiPAP AutoSV AdvancedREMstar BiPAP Auto with Bi-FlexREMstar BiPAP ST Gray Model with Smart CardRemStar BiPAP AutoSVREMstar BiPAP Pro 2 with Bi-FlexREMstar Auto CPAPREMstar Auto C-Flex CPAP MachineREMstar Plus CPAP MachineREMstar Plus C-Flex CPAPREMstar Pro 2 C-Flex CPAP MachineREMStar BiPAP Plus Dimensions: 3 5/8” x 1 9/16” Which Way Does the Filter Go? 1. Ultra Fine White Filter: Remove the old filter first and discard. Clean the area with a dry cloth. The white filter should be placed into the filter area with the mesh-side facing in. The tab should be at the top 2. Grey Foam Washable Filter: This filter should be placed on top of the white filter. When properly inserted, you should only see the grey foam filter and a small section of the white tab. How Often Should I Clean the Filters? Clean the gray foam filter at least once every two weeks and replace it with a new one every six months. The white ultra-fine filter is disposable and should be replaced after 30 nights of use or sooner if it appears dirty. DO NOT clean the ultra-fine filter. Wash the gray foam filter in warm water with a mild detergent. Rinse thoroughly to remove all detergent residue. Never install a wet filter into the device; it should be completely dry before reinstalling it. If the foam or white filter is torn, replace it.Caution: Dirty inlet filters may cause high operating temperatures that may affect device performance. Regularly examine the inlet filters as needed for integrity and cleanliness.
