Respironics PR System One 60 Series Ultra Fine Filters - SPF-PR1
Enhanced filtration design: This is the new filter now packaged with every Respironics PR System One CPAP. This white, ultra-fine filter provides filtration that may enhance comfort without increasing noise or changes in efficacy. OEM Part number 1029331. NEW STYLE CPAP Filter for Respironics PR System One and 60 Series -- WITHOUT TAB2 Filters per pack PR SYSTEM ONE REMstar CPAPS and BipapsRespironics M Series CPAPS and BipapsDisposable Filters New style filter does NOT have the tab at the top These Ultra Fine Filters are compatible with the following Respironics machines: All M Series CPAP and Bipap Machines All PR System One Series (50 and 60 Series) CPAP and Bipap Machines SleepEasy CPAP Machines M Series: Plus, Pro, Auto, Bipap Auto and Bipap Plus. Dimensions: 1 3/4” x 7/8” Which Way Does the Filter Go? 1. Ultra Fine White Filter: Remove the old filter first and discard. Clean the area with a dry cloth. The white filter should be placed into the filter area with the mesh-side facing in. The tab should be at the top 2. Grey Foam Washable Filter: This filter should be placed on top of the white filter. When properly inserted, you should only see the grey foam filter. How Often Should I Clean the Filters? Clean the gray foam filter at least once every two weeks and replace it with a new one every six months. The white ultra-fine filter is disposable and should be replaced after 30 nights of use or sooner if it appears dirty. DO NOT clean the ultra-fine filter. Wash the gray foam filter in warm water with a mild detergent. Rinse thoroughly to remove all detergent residue. Never install a wet filter into the device; it should be completely dry before reinstalling it. If the foam or white filter is torn, replace it.Caution: Dirty inlet filters may cause high operating temperatures that may affect device performance. Regularly examine the inlet filters as needed for integrity and cleanliness.